Glue

Polyurethane glue ISOCOLL 6309

Single-component polyurethane adhesive characterized by a high setting speed. It doesn’t contain solvents and hardens after contact with air or humidity of the surfaces to bond. It is suitable to obtain water resistant bonding in compliance with EN 204-205 class D4 standards. Suitable for applications which require high mechanical stress in assembly and...
Available
Nuo €9.54

Acetone cleaner S105

QG.S105.500
Can be used safely on most canister spray equipment and is a strong solvent (will not remove dried/cured PU products). This product can be used safely on most surfaces and substrates including painted surfaces, glass, porcelain, concrete, and is compatible with many plastics and vinyls.
Available
Nuo €6.44

Citrus adhesive cleaner C101

QG.C101.500
Biodegradable, citrus solvent cleaner, degreaser and adhesive remover. It can be used safely on most surfaces and substrates, including painted surfaces, glass, porcelain, concrete, and is compatible with many plastics and vinyls.
Available
Nuo €12.31

Edge cleaner

GLB4938000
Borma Abs Edging Cleaner is a special product to easily remove hot melt residues from the surface of ABS, PVC and Melamine Edging. Price for 1l.
Out of stock
Nuo €6.44

Self-hardening urea-formaldehyde powder glue...

KK.RES445
Characterized by high setting speed, good pot-life and high bonding strength. Used in the wood industry for hot bonding. Suitable to obtain products of E1 class. It is used to produce plywood, cored panels, chipboard and furniture required to have low formaldehyde emission. Viscosity: Brookfield at 20 °C, g3/5rpm 3000-8000 mPa.s pH at 20 °C 4 – 5,5.
Available
Nuo €3.12

PVAc based adhesive FOLCO LIT X 3000

KPVA.X3000
Thermolaminating of decorative finish foils; surface bonding of e. g. HPL/CPL in short cycle presses; carcase and assembly gluing. Good water resistance: durability class D3 according to DIN EN204. Good heat resistance: > 7 N/mm² according to DIN EN 14257 (WATT 91).
Available
€1.82

Polyvinyl acetate glue NUNIVIL 80

KPVA80
Characterized by medium open time, high setting speed and transparent glue joint. It is used for gluing hardwoods or woods that are difficult to bond where a special final resistance is required.
Available
€2.89

PVAc based adhesive FOLCO LIT D3 W91

KPVA.W91
For thermolaminating of decorative finish foils; surface bonding of e. g. HPL/CPL in short cycle presses, etc. Good water resistance: durability class D3 according to DIN EN 204. Good heat resistance: > 7 N/mm² according to DIN EN 14257 (WATT 91). Achieves a high final strength with short pressing time, especially with additional heat. In compliance...
Available
€1.82

PVAc based adhesive FOLCO LIT D4 W91

KPVA.W91D4
For parts which are exposed to the weather, however, with appropriate surface protection. Due to its high heat resistance particularly suitable e. g. for segmented profiles, window scantlings and window edges. FOLCO LIT D4 W91 is a highly water resistant wood adhesive which corresponds to the durability class D4 according to DIN EN 204. Good heat...
Available
€3.15

Hot melt glue sticks KTP1110L

KTP1110L
1110L is a thermoplastic adhesive, which are used to melt glue gun or automatic equipment. They are suitable for bonding wood, paper, fabric, plastic and metal, the repair, installation and various household tasks. Melting point 107 °C. Hardening time 10 s.
Available
Nuo €9.81

Hot melt adhesives capsules KT782

KT782
Special hot-melt adhesive with EVA-copolymer base specific for Holz-Herr machines. It is used for bonding of veneer and solid wood edges, PVC and ABS edges, decorative laminate edges, polyester and synthetic resin edges. Working temperature 200-220 °C. Operating speed 8-20 m/min.
Available
Nuo €2.69

Hot melt adhesives KT636

KT636
For hand-held edge banding machines. Distinguished by a long open time, fast release and heat resistance. Temperature on roller 160-190 °C. Operating speed 8-15 m/min.
Available
Nuo €6.20

Hot melt adhesives KT1851N

KT1851N
Edgebanding with all common types of edges on standard edgebanding machines. Excellent adhesion properties. High heat resistance. Clean running properties. High initial strength. Temperature on roller 160-210 °C. Operating speed min. 10 m/min.
Available
Nuo €5.57

Hot melt adhesives KT658

KT658
For automatic edge banding machines. Due to the high melting speed is ideal for edge canting and on the thick panels. Temperature on roller 190-210 °C. Operating speed 10-35 m/min.
Available
Nuo €3.67

Hot melt adhesives KT674

KT674
For automatic edge banding machines. The product is characterized by versatility: excellent melting speed, open time and viscosity. Temperature on roller 200-220 °C. Operating speed 10-50 m/min.
Available
Nuo €3.04

Hot melt glue sticks KTP1201

KTP1201
12011L are thermoplastic adhesives, which are used to melt glue gun or automatic equipment. They are suitable for bonding wood, paper. Melting point 88 °C. Hardening time 15 s.
Available
Nuo €9.81

Polyurethane glue ISOCOLL 51

KP.ISOC51
One-component polyurethane glue. Resistant to the impact of water, solvents and high temperature. The glue meets the D4 class standards according to EN 204-205.
Available
Nuo €6.91

Spray-on solvent based glue DURASPRAY 349 HF

KKO349H14
For two-sided gluing. Good fluidity, high elasticity, good heat resistance. Specific for expanded PU on wood, metals, support belts, and on natural or synthetic fabrics. Solid particle amount 40%. Viscosity 250 mPas, 20°C.
Available
Nuo €4.31
Product added to compare.