Hard Wax - Melting hard stick

Melting wax stick of considerable hardness when set. Special for refurbishing, synthetic and modern surfaces, 95°C melting point. 90 colours available light resistant. For indoor use. It has many characteristics that make it an ideal product such as good adhesion for an easier application, a good plasticity, and a noticeably hardness on touch. The product is compatible with any follow on work. Using a sharp knife remove any splinters or damaged wood from the area to be repaired in order to form a sound base for the application of the wax. Pre-stain the damaged area using a suitable shade of Touch-up dye pen, Colour edging pen, Touch-up dye or Colour touch-up, and fill with the wax. Using the Gas heating iron, melt the wax into the damage until it is full. Then apply the other waxes in various coats and shades until the colour is achieved. Wait until the wax is cold, remove any excess with a spatula or fine steel wool. To get the best shade, touch up with the Touch-up dye pen, Graining pen, Colour edging pen, Touch-up dye or Colour touch-up. Fix with a fine coat of Holzspray spray varnish.